X

More Electrical Aircraft Publications

Journal Articles

Axis: Components & Devices
A. Bensoussan, E. Suhir, P. Henderson and M. Zahir: “A unified multiple stress reliability model for microelectronic devices — Application to 1.55 μm DFB laser diode module for space validation”. Microelectronics Reliability Journal (2015)

Y. Yin, C. Gaya, A. Torayev, V. Thangavel and A. A. Franco: “Impact of Li2O2 Particle Size on Li−O2 Battery Charge Process: Insights from a Multiscale Modeling Perspective”. The journal of physical chemistry letters (2016)

Robustesse
A. Durier, A. Bensoussan, M. Zerarka, C. Ghfiri, A. Boyer and H. Frémont: “A methodologic project to characterize and model COTS component reliability”. Microelectronics Reliability Journal (2015)

A. Bensoussan: “How to quantify and predict long term multiple stress operation: Application to Normally-Off Power GaN transistor technologies”. Microelectronics Reliability Journal (2016)

A. Bensoussan: “Microelectronic Reliability models for more than Moore nanotechnology products”. Facta Universitatis (2016)

J. B. Bernstein, E. Bender and A. Bensoussan: “Reliability Prediction with MTOL”. IEEE Transactions on Device and Materials Reliability (2016)

Conference Proceedings

Axis: Components & Devices
E. Suhir, A. Bensoussan and J. Nicolics: “Predicted Device-Degradation Failure-Rate”. SAE 2015 (SAE AeroTech Congress & Exhibition), Seattle (USA). 2015

E. Suhir, A. Bensoussan and J. Nicolics: “Bow-Free Tri-Component Mechanically Pre-Stressed Failure-Oriented-Accelerated-Test (FOAT) Specimen”. SAE 2015 (SAE AeroTech Congress & Exhibition), Seattle (USA). 2015
A. Bensoussan: “M-STORM Reliability model applied to DSM Technologies”. NMDC 2016 (Nanotechnology Materials and Devices Conference), Toulouse (France). 2016

Robustesse
E. Suhir and A. Bensoussan: “Quantified Reliability of Aerospace Optoelectronics “. SAE 2014 (Aerospace Conference), Cincinnati (USA). 2014

A. Durier, A. Boyer and G. Duchamp: “A methodologic project to characterize and model COTS components EMC behavior after ageing”. APEMC 2016 – 7th Asia Pacific International Symposium on Electromagnetic Compatibility & Signal Integrity Shenzhen (China). 2016

C. Ghfiri, A. Boyer, A. Durier, S. Ben Dhia and C. Marot: “Construction d’un modèle ICEM pour prédire l’émission électromagnétique d’un FPGA”. CEM 2016 (18th International Symposium on ElectroMagnetic Compatibility), Rennes (France). 2016

C. Ghfiri, A. Durier, A. Boyer, S. Ben Dhia and C. Marot: “Construction of an Integrated Circuit Emission Model of a FPGA”. APEMC 2016 (7th Asia Pacific International Symposium on Electromagnetic Compatibility & Signal Integrity), Shenzhen (China). 2016

S. Hairoud Airieau, T. Dubois, G. Duchamp and A. Durier: “Modèle ICIM-CI multiports d’une référence de tension”. CEM 2016 (18ème Colloque International et Exposition sur la Compatibilité ÉlectroMagnétique), Rennes (France). 2016

S. Pin, H. Frémont and A. Gracia: “Numerical study of thermomechanical fatigue influence of intermetallic compounds in a lead free solder joint”. ESTC 2016 (6th Electronics System-Integration Technology Conference), Grenoble (France). 2016

M. Zerarka, A. Durier, A. Bensoussan, P. Austin and F. Morancho: “TCAD simulation of the Single Event Effects in normally-off GaN transistors after heavy ion radiation”. RADECS 2016, Bremen (Germany). 2016
Axis : Technologies & Equipment
B. Cougo: “Optimal cross section shape of tape wound cores”. EPE’15 ECCE-Europe (17th European Conference on Power Electronics and Applications), Geneva (Switzerland). 2015

Integration
A. Castelan, B. Cougo, J. Brandelero, D. Flumian and T. Meynard: “Optimization of forced-air cooling system for accurate design of power converters”. ISIE 2015 (24th IEEE International Symposium on Industrial Electronics), Buzios (Brazil). 2015

A. Bernot: “A high reliability natural convection airliner actuator permanent magnet motor”. ICEM 2016 (XXIIth International Conference on Electrical Machines), Lausanne (Switzerland). 2016

A. Bernot and G. Trémouille: “Optimisation and adaptation of an existing aeronautic motor to an HVDC network”. PEMD (8th IET International conference on Power Electronics, Machines and Drives), Glasgow (UK). 2016

B. Cougo, J.-P. Carayon, V. Dos Santos, A. Hilal and T. Billard: “Impacts of the use of SIC semiconductors in actuations systems”. R3ASC’16 (Recent Advances in Aerospace Actuation Systems and Components), Toulouse (France). 2016

A. Giraud, A. Bernot, Y. Lefevre and J.-F. Llibre: “Modelling quasi-static magnetic hysteresis: a new implementation of the play model based on experimental asymmetric B(H) loops”. ICEM’2016 (XXIIth International Conference on Electrical Machines), Lausanne (Switzerland). 2016

A. Giraud, A. Bernot, Y. Lefèvre and J.-F. Llibre: “Influence du spectre de l’induction magnétique sur les pertes fer dans les stators de machines électriques”. SGE 2016 (Symposium de Genie Electrique), Grenoble (France). 2016

A. Hilal and B. Cougo: “Optimal Inductor Design and Material Selection for High Power Density Inverters Used in Aircraft Applications”. Esars 2016 ( International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles), Toulouse (France). 2016

A. Hilal, B. Cougo and T. Meynard: “Characterization of High Power SiC Modules for More Electrical Aircrafts”. EICON 2016 (42nd Annual Conference of IEEE Industrial Electronics Society), Firenze (Italy). 2016

Double & Bump
P. Favre, J.-M. Reynes and J. Favre: “Real 3D-packaging: a breakthrough for high power electronics for automotive applications”. APE – SIA 2015 (Société des Ingénieurs de l’Automobile), Paris. 2015
Axis: Physics Phenomena Understanding

E. Suhir, A. Bensoussan, G. Khatibi and J. Nicolics: “Probabilistic design for reliability in electronics and photonics: Role, significance, attributes, challenges”. IRPS 2015 (IEEE International Reliability Physics Symposium), Monterey (USA). 2015

T. Billard, C. Abadie and T. Lebey: “Partial discharge testing in aeronautic environment on magnet wire and feeder cables”. EIC 2016 (Electrical Insulation Conference), Montréal (Canada). 2016

Fiabilité
B. Cella, T. Lebey and C. Abadie: “Partial discharges measurements at the constituents’ level of aerospace power electronics converters”. EIC 2015 (Electrical Insulation Conference), Seattle (WA, USA). 2015

C. Abadie, T. Billard and T. Lebey: “Influence of pressure on partial discharge spectra”. EIC 2016 (Electrical Insulation Conference), Montréal (Canada). 2016

C. Abadie, T. Billard and T. Lebey: “Numerical signal processing methods for partial discharge detection in more electrical aircraft”. ICD 2016 (1st Conference on Dielectrics), Montpellier (France). 2016

T. Billard, C. Abadie and B. Taghia: “Non-intrusive partial discharges investigations on aeronautic motors”. SAE 2016 (Aerospace and Technology Conference – ASTC), Hartford, Connecticut (USA). 2016

Conference Communications

L. Lachassagne: “Caractérisation expérimentale de grandeurs thermiques”. Astelab Thermique 2016 ; Virtualisation de la conception et tests thermiques des systèmes, Toulouse (France). 2016

Axis: Components & Devices
A. Bensoussan: “Photonic devices in harsh environment: a generalized reliability model”. PHAROS 2016, Bordeaux (France). 2016

A. Bensoussan: “Optoelectronic devices in harsh environment: a multistress reliability predictive model”. ISROS 2016 (International Symposium on Reliability of Optoelectronics for Systems), Otwock (Poland). 2016

O. Gilard, A. Bensoussan, S. Mariojouls, D. Veyrié, H. Brahimi, G. Guibaud and J. Hauden: “Reliability assurance guideline for lithium niobate-based electro-optical modulators”. ISROS 2016, Otwock (Poland). 2016

Robustesse
A. Durier: “Methodology proposal to characterize and model ageing effect on components’ EMC behavior (Emission and Immunity)”. ESREF 2015 (26th European Symposium on Reliability of Electron Devices, Failure Physics and Analysis), Toulouse (France). 2015

A. Durier: “A methodology project to characterize and model EMC behavior of COTS components after ageing”. EMC COMPO 2015, Edinburgh (United Kingdom). 2015

A. Durier, A. Bensoussan, M. Zerarka, C. Ghfiri, A. Boyer and H. Frémont: “A methodologic project to characterize and model COTS component reliability”. ESREF 2015, Toulouse (France). 2015

M. Zerarka: “Modelling Radiation effects on Normally-Off GaN Transistors”. ESREF 2015 (26th European Symposium on Reliability of Electron Devices, Failure Physics and Analysis), Toulouse (France). 2015

A. Bensoussan and F. Tilhac: “A Multistress reliability model applied to Normally-Off GaN Switch Power Transistors”. Wide gap power components in energy conversion, Toulouse (France). 2016

S. Hairoud Airieau, T. Dubois, G. Duchamp and A. Durier: “Multiport ICIM-CI modeling approach applied to a bandgap voltage reference”. EMC Europe 2016, Wroclaw (Poland). 2016

M. Zerarka: “Modelling Radiation effects on Normally-Off GaN Transistors”. Wide gap power components in energy conversion, Toulouse (France). 2016

Axis: Technologies & Equipment
B. Cougo: “Overview on SiC and GaN transistors in modern power electronics for More Electrical Aircraft applications”. Wide gap power components in energy conversion, Toulouse (France). 2016

A. Davy and J.-P. Carayon: “Augmentation de la densité de puissance des chaînes électromécaniques par la maîtrise des technologies clés et une approche pluridisciplinaire permettant l’optimisation”. Entretiens de Toulouse, Toulouse (France). 2016

Double & Bump
D. Elzo, C. Cadile, J.-P. Fradin, J.-M. Reynes, B. Du Trieu, P. Monfraix and J. Favre: “Caractérisation hydrodynamique d’un module de puissance de nouvelle génération”. SFT 2016 (Congrès Français de Thermique), Toulouse (France). 2016

D. Elzo, S. Sanchez, J.-M. Reynes and J. Favre: “Caractérisation électrique, thermique et fluidique de modulfes de puissance de nouvelle génération”. Astelab Thermique 2016 ; Virtualisation de la conception et tests thermiques des systèmes, Toulouse (France). 2016

J.-P. Fradin, D. Elzo, S. Sanchez, J. De Martres, G. De Ramecourt, J.-M. Reynes, B. Du Trieu and P. Monfraix: “Characterization of highly dissipative power modules”. IMAPS 2016 (11th European ATW on Micropackaging and Thermal Management), La Rochelle (France). 2016

J.-P. Fradin, D. Elzo, S. Sanchez, J.-M. Reynes, B. Du Trieu and P. Monfraix: “Elaboration d’un banc de test pour la caractérisation thermo-fluidique de modules de puissance de nouvelle génération”. SFT 2016 (Société Française Thermique), Toulouse (France). 2016